Epson PictureMate - Page 48

47
You see the Photo Viewer Adjustment screen:
4 Press or to adjust the contrast of the screen,
then press OK.
5 Continue pressing OK to exit the menu.
Selecting Your Personal Settings
You can reset the PictureMate settings to the ones you
prefer. The settings you choose will become your
“defaults,” but you will still be able to change them
when you print. You can change the following settings:
1 At the photo selection menu, press the Menu
button.
2 Press or to highlight Setup, then press to
open the menu.
3 Press or to select Personal Settings Wizard,
then press .
4 Press , then select the setting you use most
often, then press the OK button.
5 Press OK again to move to the Color Effects
setting.
6 Repeat steps 4 and 5 for all the settings listed on
the left side of the page.
● Layout ● Time Stamp
● Color Effects ● Top Screen
● Date Stamp