Epson PictureMate - Printer Care and Troubleshooting; Cleaning the Print Head

48
The Top screen setting determines which selection
mode (such as Print All or Print Some) is highlighted
when you first turn on PictureMate.
Returning to Factory Settings
You can return your personal settings to the
PictureMate original default settings.
1 At the photo selection menu, press the Menu
button.
2 Press or to highlight Setup, then press to
open the menu.
3 Press or to select Return to Factory Settings,
then press . You see this message:
4 Press OK to restore the original settings, or press
Back to go back to the menu without restoring the
settings.
After you restore the factory settings, you see a
message asking if you want to change your personal
settings. See page 47 for more information.