Connecting to Computers, USB Devices, and Other Equipment 57
Connecting an RGB Video Source
1. Locate the VGA computer cable provided with the projector.
2. Connect the cable to the video port on your player and the
Computer1 or Computer 2 port on the projector.
3. If you want to play sound through the projector, see page 59 for
instructions on connecting audio cables.
4. If you don’t need to make any other connections, see page 22 for
instructions on turning on the projector and adjusting the image.
Once the projector is turned on, press the
Source Search button
on the remote control or the projector’s control panel and select
Computer1 or Computer2 as the image source.
note
Make sure the Input Signal
setting in the Signal menu is
set to Auto or RGB Video
(see page 107).
Connect to RGB video source
To Next Page
Loading...
