117
Switching to Content Playback Mode
You need to switch to Content Playback mode to use its features.
1. Turn on the projector.
2. Press the Menu button.
3. Select the Settings menu and press Enter.
4. Select the Content Playback setting and press Enter.
5. Select the On setting and press Enter.
You see a confirmation prompt.
6. Turn off the projector.
7. Turn on the projector again to enable Content Playback mode.
8. Press the Home button to make sure Content Playback mode is enabled.
Parent topic: Projecting in Content Playback Mode
To Next Page
Loading...
