120
Projecting One Image on Multiple Projectors Simultaneously
You can set up a timetable to simultaneously project a synchronized playlist across multiple (up to 16)
projectors.
Note the following guidelines when using this feature:
• All projectors that will be involved in synchronized playback must be the same model. If any of the
projectors are a different model or have a different resolution, synchronized playback may not be
performed properly.
• Make sure the name, date, and time settings are correct for all projectors.
• Connect all projectors to the same network. We recommend connecting over a wired LAN. Otherwise,
playback may not be performed simultaneously between projectors depending on the network status.
• Make sure you prepare the same number of USB flash drives as there are projectors.
• If you want to include still images in the playlists, prepare them in JPEG format.
1. Create playlists, set timetables for each of the playlists, and export them to USB flash drives using
the Epson Projector Content Manager software.
Note:
• See the Epson Projector Content Manager Operation Guide for instructions.
2. Place each projector in Content Playback mode.
To Next Page
Loading...
Need help?
General