144
Matching the Screens Manually
You can manually correct the brightness and tint for multiple projectors.
1. Press the Menu button.
2. Select the Extended menu and press Enter.
3. Select the Multi-Projection setting and press Enter.
4. Select the Color Matching setting and press Enter.
You see this screen:
5. Press the left or right arrow buttons to select a value for the Adjustment Level setting.
Note: There are eight adjustment levels ranging from white to black and you can adjust each level
individually.
6. Press the left or right arrow buttons to adjust the color tone for the Red, Green, and Blue settings.
7. Press the left or right arrow buttons to adjust the Brightness setting.
8. Repeat the previous three steps as necessary to adjust each adjustment level.
9. Press the Esc button to return to the previous screen.
Parent topic: Using Multiple Projectors
Scheduling Projector Events
You can save a projector command, such as turning the projector on or off or switching input sources, as
an "event." You can schedule when you want the projector to automatically execute the command.
Caution: Do not place flammable objects in front of the lens. If you schedule the projector to turn on
automatically, flammable objects in front of the lens could catch on a fire.
To Next Page
Loading...
Need help?
General