119
Projecting a Playlist in Content Playback Mode
You can project playlists that contain images and movies in Content Playback mode.
1. Create a playlist and export it to a USB device using the Epson Projector Content Manager software.
Note: See the Epson Projector Content Manager Operation Guide for more information.
2. Turn on the projector.
3. Insert the USB device containing the playlist to the projector's USB-A port.
4. Press the USB button on the remote control to project the playlist.
The playlist that was played last is projected. If a timetable is assigned, the playlist will play back
according to the schedule in the timetable.
Note: You can also hold down the Num and numeric buttons to project your playlist.
Note: To select a specific playlist, press the USB Viewer button on the remote control and use the arrow
buttons to select your playlist.
Parent topic: Projecting in Content Playback Mode
To Next Page
Loading...
Need help?
General