Publishing Discs 24
Standard Mode
This mode uses stacker 1 as the input stacker, and stacker 2, 3, or 4 as the output stacker.
When stacker 2 or 3 is selected as the output stacker, up to 50 discs can be created at
once. Also, if you refill discs in the input stacker and take out published discs from the
output stacker at the same time, up to 1000 discs can be published in a single job.
If stacker 4 is selected as the output stacker, discs can be removed without stopping the
product while running a job.
& See “Standard Mode” on page 27.
External Output Mode
This mode uses stacker 1 and 2 as the input stackers, and stacker 3 or 4 as the output
stacker.
Different types of discs (CD, DVD, or BD) can be loaded into each of the 2 stackers and
can create different types of discs. This is ideal for creating small batches of discs at once.
If the same type of discs are loaded into stacker 1 and 2 and Auto is selected for the input
stacker setting, up to 100 discs can be continuously published by taking out published
discs without refilling discs.
Up to 1000 discs can be continuously published in a single job by refilling discs and taking
out published discs.
If stacker 4 is selected as the output stacker, discs can be removed without stopping the
product while running a job.
Note:
This mode does not use stacker 3 if you select stacker 4 as the output stacker.
& See “External Output Mode” on page 37.
Batch Mode
This mode uses stacker 1 and 2 as the input stackers, and stacker 2 and 3 as the output
stackers.
You can create up to 100 discs at once without refilling and taking out discs while
publishing. Up to 1000 discs can be continuously published in a single job by refilling discs
and taking out published discs. To use this mode, you need to place stacker 3 into the
product.
& See “Batch Mode” on page 48.
To Next Page
Loading...
Need help?
General
