Maintaining Your Product 78
Cleaning the Interior of the Product
To keep your printouts at their best, clean the inside by using the following procedure.
1. Make sure the product is turned off and all the lights are off, and then unplug the power
cord from the electrical outlet.
2. Open the disc cover, and remove the stackers from the product.
3. Use a soft, clean cloth to carefully remove any dust or dirt from the stackers and inside
of the product.
4. Place the stackers back in position.
c
Caution:
❏ Be careful to keep water away from the electronic components.
❏ Do not spray the inside of the product with lubricants.
❏ Dirt attached to stacker 3 or 4 should be wiped clean with a soft cloth moistened with
neutral detergent.
Getting Maintenance Information
You can get helpful information for maintenance and support of the product, the cumulative
number of published discs and the free space of the maintenance box.
1. Make sure that the product is connected to the computer via the USB cable and that the
product is turned on.
2. Click Start ( in Windows 7 or Windows Vista), point to All Programs or Programs.
Point to EPSON Total Disc Maker, and then click EPSON Total Disc Setup.
3. Select CD/DVD/BD Publisher, and then click Properties.
4. Click the Maintenance Info tab.
To Next Page
Loading...
Need help?
General
