Troubleshooting 92
❏ The number of discs in the stacker does not exceed the limit specified for that disc.
& See “Mechanical” on page 111.
❏ The product is on a flat, stable surface that extends beyond the base in all directions.
The product will not operate properly if it is tilted.
Print Quality Problems
If you are having a print quality problem, then compare it with the illustrations below. Click
the caption under the illustration that best resembles your printout.
Good sample Good sample
“Horizontal Banding” on page 93
“Vertical Misalignment” on page 93
“Horizontal Banding” on page 93 “Vertical Misalignment” on page 93
“Incorrect or Missing Colors” on page
94
“Blurry or Smeared Printout” on page 94
To Next Page
Loading...
