Publishing Discs 35
3. Set Stacker Settings.
❏ Publish Mode: Select Standard mode.
❏ Stacker 3: If you want to eject published discs to stacker 3, select Use.
If you want to eject published discs to stacker 4, select Do not
use.
Note:
You can also eject published discs to stacker 2 by making the publish settings later on the Publish
screen of EPSON Total Disc Maker, regardless of the Stacker 3 setting.
4. Click OK.
Publishing Discs
The following instructions explain how to publish discs.
1. Make the publish settings on the Publish screen of EPSON Total Disc Maker. For
details, see Help for EPSON Total Disc Maker.
Note:
To access Help for EPSON Total Disc Maker, select Help from the Help menu.
To Next Page
Loading...
Need help?
General
