Product Information 106
Technical Specifications
Discs
c
Caution:
Printable discs are 12 cm (4.72”) CD/DVD/BD discs. The 80 mm (3.15”) discs are not
supported.
Note:
❏ Since the quality of any particular brand or type of disc may be changed by the manufacturer at
any time, Epson cannot attest to the quality of any brand or type of disc. Always test samples
of disc stock before purchasing large quantities or printing large jobs.
❏ Poor quality discs may reduce print quality and cause disc jams or other problems. If you
encounter problems, switch to a higher grade of disc.
❏ The specified disc is for ink jet printers. Thermal transfer discs are not supported.
❏ The specified disc has a moisture adhesive ink receptor layer on the label surface. If stored
stacked, especially under high humidity and high temperature conditions, discs may adhere to
each other. If an automatic duplication machine is used, please check the disc before using.
❏ Please treat the recording surface (blue green colored side) and printing surface carefully so
they do not have fingerprints, dirt, dust, water, or scratches. Dust and dirt on the recording
surface should be wiped gently with soft dry cloth, commercially available disc cleaner, or ethyl
alcohol. Do not use benzine, thinner, or antistatic material.
CD/DVD/BD:
Notes for handling discs
Notes when using discs
❏ Do not touch recording surface when holding it.
❏ Handle with care so that label surface and recording surface do not have fingerprints,
dirt, dust, water drops, or scratches.
❏ Do not drop or hit discs.
❏ Do not apply excess force, like pinching with a clip, or bend.
❏ Do not attach an adhesive sticker to the disc. This may result in the disc being unable
to record or play.
Label side Printable
Glossy labels other than the specified disc type are not supported.
To Next Page
Loading...
Need help?
General
