Maintaining Your Product 80
Transporting Your Product
If you need to transport your product some distance, carefully prepare and repack it. Be
sure to use the original box and packing materials.
w
Warning:
The product is heavy, so have two people lift the product.
c
Caution:
❏ When storing or transporting the product, do not tilt it, stand it up vertically, or turn it
upside down. If you need to transport the product, carefully prepare and repack it using
the original box and packing materials in order to protect the product from shock.
❏ Leave the ink cartridges installed. Removing the cartridges can dry out the print head and
may prevent the product from printing.
❏ Leave the maintenance box installed. Removing the maintenance box may cause ink
leakage.
1. Turn off the product and unplug its power cord.
2. Disconnect the interface cable.
3. Remove all discs from the stackers.
4. Open the ink cartridge cover. Secure the ink cartridges with tape; then close the ink
cartridge cover.
5. Close the disc cover and stacker 4 tray. Secure them with tape.
6. Attach the protective materials to both sides of the product.
7. Repack the product and accessories in the original box.
Note:
❏ Keep the product level during transport.
❏ Be sure to remove the protective materials and tape from the product before using it again.
To Next Page
Loading...
Need help?
General
