Publishing Discs 60
❏ If the ink smears, adjust the color saturation. For details, refer to the printer driver Help.
❏ When publishing discs using Batch mode, the number of discs output to stacker 3 is not always
the same as the number of discs loaded into stacker 2. Also, the number of discs does not
always become 50. The same applies to the number of discs output to stacker 2. For Batch
mode, the output stacker switches to stacker 2 when the ejected discs accumulated in stacker
3 reach the height limit. As a result, the number of discs output to the stacker depends on the
thickness of the discs used.
To Next Page
Loading...
