100
The monitoring folder is set to a folder which cannot be written to using
a limited account.
Log on to Windows using an administrator account and change it to a
folder which can be written to using a limited account.
! OK The monitoring folder’s improper setting is detected
when starting up TD Bridge while logging on to
Windows with a limited account.
The disc cannot be published because the remaining space at the
output device is insufficient.
Please remove unnecessary job data to increase the remaining space.
!OK
Cancel
Space in the HDD in the output device is not sufficient
when a job is issued.
The path specified for the error rate log output folder of EPSON Total
Disc Setup does not exist or you do not have access to it.
Start EPSON Total Disc Setup and specify the error rate log output folder
again, or set up the access privileges.
Clicking Cancel cancels publishing, and exits TD Bridge.
! OK
Cancel
The path specified for the error rate log output folder of
EPSON Total Disc Setup does not exist or you do not
have access to it.
The remaining space of the error rate log output folder is not sufficient.
After changing the folder or obtaining the available space, click OK.
Clicking Cancel cancels publishing, and exits TD Bridge.
!OK
Cancel
The remaining space of the error rate log output folder is
not sufficient.
The error rate threshold of EPSON Total Disc Setup has not been set. Set
the threshold and click OK.
Clicking Cancel cancels publishing, and exits TD Bridge.
! OK
Cancel
The error rate threshold of EPSON Total Disc Setup has
not been set.
There is an unfinished job. Do you want to exit? ! YES
NO
There is an unfinished job in the monitoring folder when
exiting TD Bridge.
TD Bridge is already running. ! OK TD Bridge was already running when it was started up.
The application could not start because the necessary resource file
could not be found. Please reinstall the application.
! OK The resource file could not be found when starting up TD
Bridge.
TD Bridge cannot be started because the file (Control.ini) necessary for
operation cannot be found. Reinstall EPSON TD Bridge.
! OK The file (Control.ini) necessary for operation cannot be
found.
The process cannot proceed because EPSON Total Disc Maker cannot
be found.
Install EPSON Total Disc Maker.
! OK The executable file for EPSON Total Disc Maker cannot be
found when a job is issued.
EPSON Total Disc Control Service is not running. ! OK Detected that the service of EPSON Total Disc Maker is
not running.
You cannot publish from TD Bridge because EPSON Total Disc Maker is
already running.
Exit EPSON Total Disc Maker and click OK.
Clicking Cancel cancels publishing, and exits TD Bridge.
!OK
Cancel
EPSON Total Disc Maker is running when a job is issued.
Cannot get the version of EPSON Total Disc Maker.
Reinstall EPSON Total Disc Maker.
! OK Cannot get the version information of EPSON Total Disc
Maker.
This version of EPSON Total Disc Maker is not supported.
Install a supported version of EPSON Total Disc Maker.
! OK Detected that the version of EPSON Total Disc Maker is
not supported.
The changed settings will be enabled when you next start the program. ! OK Changed the settings in the environment settings
screen, and clicked [OK]
Select a folder on the local computer as the monitoring folder. ! OK Selected a folder outside the local computer in the folder
selecting dialog in the environment settings screen, and
clicked [OK].
Restart TD Bridge to enable the settings.
TD Bridge will exit.
! OK
Cancel
The environment settings was changed.
Could not write the TD Bridge Environment Settings file. ! OK After clicking [OK] in the environment settings screen, ini
file cannot be written since you do not have access to it,
though the file exists.
The TD Bridge environment setting file does not exist or you do not
have access to it.
TD Bridge will exit.
! OK The ini file does not exist or you do not have access to it
when trying to open it right after TD Bridge starts up, or
after opening the environment setting screen.
Reboot the computer to enable the settings. ! OK The environment settings was changed.
Reboot the computer to enable the settings.
TD Bridge will exit.
! OK
Cancel
The environment settings was changed.
Message Icon Button Cause
To Next Page
Loading...
