Epson PP-100II Technical Reference Guide

37
Chapter 3 Setting
3
Setting the Printer Driver
The printer driver allows you to configure various print settings. This section explains only about the required settings to be
used by the cooperative application.
Click [Start]-[All Programs]-[EPSON Total Disc Maker]-[EPSON Total Disc Maker] to start EPSON Total Disc Maker.
When EPSON Total Disc Maker is started, click [Publish] - [Tool] - [Print Setting].
Printer driver setting window is displayed. In the window, the following settings can be made. (The window shown is for the
PP-100.)
Setting Item Explanation
Mode
Setting
Color/Black Select color print or black (monochrome) print.
High Speed When this is selected, the bi-directional printing method is applied.
Color Settings Color tone applied to the printing can be configured.
Drying Time Specify the time for drying ink (from when label print is finished until when the
disc is moved toward the output stacker). Selectable up to 600 seconds in
increments of one second.

Epson PP-100II Specifications

General

Model	PP-100II
Category	Disc Duplicator
Disc Capacity	100 discs
Print Technology	Inkjet
Print Resolution	1440 x 720 dpi
Interface	USB 2.0
Weight	24 kg
Number of Drives	1
Dimensions	377‎ x 493 x 348 mm (Width x Depth x Height)
Writing Speed	CD: up to 40x, DVD: up to 12x
Operating System Compatibility	Windows XP, Vista, 7
Supported Disc Formats	CD-R, DVD-R, DVD+R