Epson PP-100II - Error Codes and Remedies

83
Chapter 4 Development Guide for a Cooperative Application
4
Error Codes and Remedies
When an error occurs, the corresponding error code is recorded.
List of Error Code before Accepting Jobs
When any one of these error occurs while a job is being accepted, accepting the job is cancelled. The JDF file becomes ERR
file, and the job status written in the STF file becomes "STATUS=6".
Job status Key name Error code Description
System error SYS001 Accepting the job is failed.
SYS002 Executing the job failed due to the communication error with the publishing machine.
SYS003 Executing the job failed because the HDD of the publishing machine does not have
enough space.
Not accepted JOB_ID key JDF0100 The specified job ID already exists.
JDF0101 The specified job ID contains more than 40 characters.
JDF0102 The specified job ID contains characters other than English one byte characters/
numbers, "-", and "_".
PUBLISHER key JDF0200 The specified publishing machine name has not been registered.
JDF0201 Multiple publishing machines are detected, but none of them has not been specified
using the PUBLISHER key. Or no publishing machine has not been specified in the
Environment Setting.
JDF0202 The publishing machine specified by the PUBLISHER key is set to an unsupported mode,
or a mode cannot be acquired.
JDF0203 There is no publishing machine that has been registered.
COPIES key JDF0300 [PP-100II / PP-100 / PP-100AP / PP-100N / PP-50BD]
For the number of copies, a value outside the range of 1 to 1000 is specified for the
COPIES key.
[PP-7050BD error rate measurement mode]
For the number of copies, a value outside the range of 1 to 50 is specified for the COPIES
key.
OUT_STACKER key JDF0400 [PP-100II / PP-100 / PP-100AP]
A value other than "2", "3", "4" is specified.
[PP-100N]
A value other than "2" or "4" is specified.
[PP-50BD / PP-7050BD]
A value other than "2" or "3" is specified.
DISC_TYPE key JDF0500 The specified disc type is not the same with that has been specified for the source
stacker.
JDF0501 DISC_TYPE key has not been specified.
JDF0502 [PP-100 / PP-100AP / PP-100N ]
A value other than "CD", "DVD", or "DVD-DL" is specified.
[PP-100II / PP-50BD / PP-7050BD]
A value other than "CD", "DVD", "DVD-DL", "BD", or "BD-DL" is specified.
WRITING_SPEED key JDF0600 A value other than number is specified.