76
STF File Status
The table below lists the contents (job statuses) written in the STF file.
Section name Key name Explanation
Output values that indicate
status
Change
timing
ACTIVE_JOB JOB[N]
* [N] stands for a
number that starts
from 1.
Among the jobs that TD Bride has
received, job IDs being processed or
waiting to be processed are output.
The job ID being processed is output first,
followed by the job IDs waiting for
processing in the order of execution.
Job IDs of jobs being processed or being
put in standby
When publishing a job from another TD
Bridge, the value which has a unique
identification for the job ID and TD
Bridge.
When a job is
accepted/
completed
COMPLETE_JOB JOB[N]
* [N] stands for a
number that starts
from 1.
Job ID is written from a job completed
most recently.
Job IDs of completed jobs (including jobs
finished abnormally)
Job IDs for jobs published from other TD
Bridge are not written.
When a job is
completed
[JOB_ID]
A job ID becomes
the section name.
This section is added
for each registered
job.
When publishing
from another TD
Bridge, completed
jobs are not written.
PUBLISHER
(*1)
The specified publishing machine name
is written.
Publishing machine name. This key is not
written to the file when the machine
name is unknown.
When a job is
started
STATUS An ID that represents the job status is
written.
Being registered or put in standby: "1"
Being processed: "2"
Being paused: "3"
Completed: "4"
Completed abnormally: "5"
Being not accepted: "6"
Unknown: "99"
Each time the job
status changes
PUBLICATION_NUMBE
R
(*1)
The specified number of discs to be
published is written.
The number of discs to be published
Unknown: "-1"
When a job is
started
COMPLETION_NUMBE
R
(*1)
The number of published discs is written. The number of published discs
Unknown: "-1"
When a job is
started
Each time a disc is
published
ERRORDISC_NUMBER
(*1)
The number of published discs that are
completed abnormally is written.
The number of published discs that are
completed abnormally
Unknown: "-1"
Each time an error
disc is published
TYPE
(*1)
An ID that represents the job type is
written.
Only burning data or burning and error
rate measurement: "1"
Only printing data: "2"
Burning and printing, or burning,
printing, and error rate measurement: "3"
Only error rate measurement: "4"
Unknown: "99"
When a job is
started
IN_STACKER
(*1)
The specified source stacker is written. Stacker 1: "1"
Stacker 2: "2"
Stacker 1 and 2: "1,2"
Unknown: "-1"
When a job is
started
OUT_STACKER
(*1)
The specified output stacker is written. Stacker 2: "2"
Stacker 4: "4"
Stacker 2,3: "2,3"
Unknown: "-1"
When a job is
started
ESTIMATION_TIME
(*1)
An estimated operating time for
completing the job. This is not the
estimated time of completion. (Jobs with
the error rate measurement setting only
are not written.)
An estimated time period from when
starting the job to when finishing it is
written in increments of one second.
(This key is not written for completed
jobs and when the time is unknown.)
When a job is
started
ERROR This indicates a code of error that is
occurring with the ongoing job.
When the error is cleared, the error code
is deleted when the STF file is updated.
The "ERROR" always appears even when
no error is occurring.
See "Error Codes and Remedies". Each time an error
occurs
To Next Page
Loading...
