Epson PP-100II - Merge Print of Text; Barcode; Image Item

70
Creating a Text Item File
A text item file is a file of character data to be printed. Arrange the file by following the steps below.
How to write a Text Item File
Item ID = FILE(TAB) Image file path
 Item ID
Alphanumeric character, "-," and "_" are available (case-independent).
If you input other characters than those, an error occurs.
 Image file path
For the file path, write a file path of the file in which binary data to be replaced is written.
A BMP, JPEG, TIFF, PNG file is specified for a image file.
Setting the JDF file
Setting the JDF file is the same as the merge print for text. See page 62.
Merge print of text / barcode / image item
Merge print of text, barcode and image items is available in one label file.
In this case, a text item file is written in together with a barcode item.
Item Content
File type Text (ANSI) format
File name Optional
File extensions that are not
available
CDN, CER, DON, ERR, INP, JCF, JDF,
RJD, STP
IMAGE=FILE(TAB)C:\data\cat.bmp
Text Item File example (print3.dat)
Title=Sample Disc
BARCODEFILE=FILE(TAB)C:\data\test.dat
(image4.tdd)
Label file
Print result with merged text
(print4.dat)
Text item le
Barcode item
Text item
{Title}
Sample Disc
{BARCODEFILE}
Barcode type : QR CODE
Input text
IMAGE=FILE(TAB)C:\data\art01.bmp
Item ID
IMAGE
Image item