28
Setting Items List
In order to operate Discproducer from the cooperative application, some settings must be made on the related applications
as shown in the table below.
Category Setting Item JDF
TD Bridge
Environment
Settings
Total Disc
Setup / Total
Disc Net
Administrator
Printer
Driver
EPSON
Total Disc
Maker
Remarks
Settings related
to PP-100II/
PP-100/
PP-100N/
PP-50BD/
PP-7050BD
operations
Publishing mode -- -- ● -- --
PP-100II/PP-100/
PP-100N/
PP-50BD/
PP-7050BD disc
type
-- -- ● -- --
Disc type to be
published
● -- -- -- --
The disc type in the stacker
of Total Disc Setup / Total
Disc Net Administrator
must be the same as the
disc type created in the
JDF file.
Drive setting -- -- ● -- --
Number of retries -- -- ● -- --
Prints an error
mark or not
-- -- ● -- --
Source
● -- -- ▲ --
If this item is omitted, TD
Bridge automatically
judges the source based
on the disc specified by the
JDF file.
Output stacker
● ● -- ▲ --
The JDF setting is given
priority over the TD Bridge
setting. If the stacker is not
specified in the JDF file, the
TD Bridge setting is
applied.
Settings related
to PP-100AP
operations
Publishing mode -- -- ● -- --
Source ● -- -- ● --
Output stacker
●● -- ▲ --
The JDF setting is given
priority over the TD Bridge
setting. If the stacker is not
specified in the JDF file, the
TD Bridge setting is
applied.
To Next Page
Loading...
