69
Chapter 4 Development Guide for a Cooperative Application
4
4
The item ID dialog box appears. Enter any item ID (example: IMAGE) and then click the [OK]
button.
Use only one-byte alphanumeric characters, "-", and "_" for the item ID. The item ID is not case-sensitive.
The image item will appear as slanted lines, but the image will be printed on the disk. To merge-print multiple images,
repeat steps 2 to 4.
5
Click the [Layout] tab. Make sure that the item ID is set for the image item.
6
Click [File] - [Save as] to save the label file under a desired name.
The extension of the saved label file is "TDD". For merge print, specify the TDD file in the JDF file.
To Next Page
Loading...
