Epson PP-100II - Page 43

43
Chapter 4 Development Guide for a Cooperative Application
4
In the contents example below, Read Back Plug-in is called. 10 data-written discs placed in the stacker 1 will be read, and then
files read from each will be stored in "c:\readdata". A disc from which all the files in it have been read will be ejected to the
stacker 2. (Only in PP-100II / PP-50BD / PP-7050BD)
About comment lines
When writing the JDF file, lines which starts with “#” are regarded as comment lines, and ignored. Lines which starts with
other than “#” are not regarded as comment lines.
Example 1: #DATA=C:\Data\test1.dat Regarded as a comment line.
Example 2: ##DATA=C:\Data\test1.dat Regarded as a comment line.
Example 3: # Regarded as a comment line.
DATA=C:\Data\test1.dat Not regarded as a comment line.
# Regarded as a comment line.
JOB_ID=007
PUBLISHER=Publisher 0
COPIES=10
IN_STACKER=1
OUT_STACKER=2
DISC_TYPE=CD
PLUG_IN_ID=EPSONTotalDiscReader
PLUG_IN_PARAMETER=-r "c:\readdata" -k 1 -f 1
Call Plug-in