Epson RC700 User Manual

Safety 1. Specifications
10 RC700 / RC700-A Rev.23
*1 EPSON RC+ 7.0 supports the following OS.
Windows 7 Professional Service Pack 1
Windows 8.1 Pro (EPSON RC+ 7.0 Ver.7.1.0 or later)
Windows 10 Pro (EPSON RC+ 7.0 Ver.7.2.0 or later)
*2 Up to three Drive Units can be connected.
For details, refer to following manual.
Robot Controller / Drive Unit RC700DU / RC700DU-A
*3 Any one of the manipulators can be controlled.
Available combinations are as follows. (: connectable)
C4
C8
G
RS
N2
N6
X5
RC700

-
-
-
-
-
-
RC700-A







*4 Any one of the Teach pendant can be controlled.
TP3 cannot be connected to RC700.
*5 When connecting to RC700-A, a dedicated conversion cable is required.

Epson RC700 Specifications

General

Maximum Axes	16
Communication Interfaces	Ethernet, EtherNet/IP, PROFINET, PROFIBUS, CC-Link, RS-232C, USB
Safety Standards	ISO 10218-1, ISO/TS 15066, IEC 61508, IEC 61511, ANSI/RIA R15.06
Operating System	VxWorks
Power Supply	24 VDC