Epson SC-P20000 SERIES User Manual

A
Load cut sheets A4 size or larger or roll paper,
and then perform Select Paper Type.
U “Loading and Removing the Roll Paper” on
page 31
U “Loading and Removing Cut Sheets” on
page 38
When adjusting using commercially available
paper, make sure you register the Custom
Paper in advance.
U “Before Printing on Commercially
Available Paper” on page 197
B
Click Print Head Alignment from the Utility
tab in the printer driver's Properties (or
Printing preferences) screen.
Follow the on-screen instructions.
The sensor reads the adjustment pattern while
it is printing, and automatically registers the
optimum adjustment value to the printer.
Check the adjustment results to confirm if
graininess or misalignment recurs in the
printed image.
If you are not satisfied with the adjustment
results, perform manual adjustment from the
printer.
U “From the printer” on page 147
From the printer
Before starting this procedure, be sure to read the
following.
U “Notes on Head Alignment” on page 146
Buttons that are used in the following settings
A
Set cut sheets or roll paper correctly.
When adjusting using Auto: A3 size or larger
When adjusting using Manual: A4 size or larger
U “Loading and Removing the Roll Paper” on
page 31
U “Loading and Removing Cut Sheets” on
page 38
When adjusting using commercially available
paper, make sure you register the Custom
Paper in advance.
U “Before Printing on Commercially
Available Paper” on page 197
B
Confirm that the printer is in the ready status,
and then press the " button.
The Maintenance menu will be displayed.
C
Press the d/u buttons to select Head
Alignment, and then press the Z button.
D
Select an adjustment item.
SC-P20000 Series/SC-P10000 Series User's Guide
Maintenance
147

Epson SC-P20000 SERIES Specifications

General

Brand	Epson
Model	SC-P20000 SERIES
Category	Printer
Language	English