C
When you have finished sticking to the roll
core, press the r button.
D
Check that the Auto switch on the auto take-up
reel unit is set to Off, and then press the Z
button.
The paper is automatically ejected by the length
wound around the roll core.
E
Hold down the Manual button in the taking-up
direction to wind the paper around the roll
core twice.
Printed side out: Forward
Printed side in: Backward
F
Press the Z button when paper has been
wound.
Paper is ejected automatically again.
SC-P20000 Series/SC-P10000 Series User's Guide
Basic Operations
51
To Next Page
Loading...
Need help?
General