C Maintenance box covers
Open these covers when replacing the Maintenance Box.
Some models have only the right cover.
U “Replacing Maintenance Boxes” on page 171
D Paper basket/Large-capacity paper basket
Output from the printer collects in this basket, keeping the media clean and free of creases.
The optional Stand (24) for the SC-T3200 Series comes with a paper basket.
U “Using the Paper Basket (SC-T7200 Series/SC-T5200 Series/SC-T3200 Series)” on page 45
U “Using the Large-Capacity Paper Basket (SC-T7200D Series/SC-T5200D Series)” on page 49
E Casters
There are two casters on each leg. The casters are normally kept locked once the printer is in place.
F Stack guides
(SC-T7200 Series/SC-T5200 Series/SC-T3200 Series only)
Select a guide according to the size of the media output to the paper basket.
U “Using the Paper Basket (SC-T7200 Series/SC-T5200 Series/SC-T3200 Series)” on page 45
G Stack guide switch lever
(SC-T7200 Series/SC-T5200 Series/SC-T3200 Series only)
Use to choose a stack guide.
H Cartridge cover
Open when replacing ink cartridges.
U “Replacing Ink Cartridges” on page 170
I Ink cartridges
Install all ink cartridges into each slot.
J AC inlet
Connect the supplied power cable here.
K Option port
Use when connecting the options such as MFP Scanner.
L USB port
Use when connecting to a computer using a USB cable.
M LAN port
Connects the LAN cable.
N Data light
The network connection status and data reception are indicated by a lit or flashing light.
On : Connected.
Flashing : Receiving data.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide
Introduction
10
To Next Page
Loading...
Need help?
General
