I
Lift the adapter lock levers to release the roll
paper adapters.
J
Remove the roll paper adapters.
After rewinding the roll paper carefully, store it
in the original package.
Loading and Removing
Cut Sheets
The procedure for loading and positioning cut sheets
varies with the thickness of the paper.
0.08 to 0.8 mm U “Loading Cut Sheets” on page 37
0.8 to 1.5 mm U “Loading Poster Board” on
page 39
c
Important:
If the paper is wavy or curled, flatten the paper
before loading it in the printer, or use new paper. If
wavy or curled paper is loaded, this printer may not
be able to recognize the paper size, feed the paper, or
print correctly.
We recommend that you return the paper to its
original package and store it flat, and take it out of
the package just before you use it.
Loading Cut Sheets
c
Important:
Insert the paper just before printing. The pressure
rollers may leave impressions on paper that is left in
the printer.
Note:
The paper that can be used in the printer is detailed in the
following section.
U “Supported Media” on page 196
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide
Basic Operations
37
To Next Page
Loading...
Need help?
General
