Epson SC-T7200 Series User Manual

When a Maintenance Call/Service Call Occurs
Error messages What to do
Maintenance Request
Replace Part Now/Soon XXXXXXXX
A part used in the printer is nearing the end of its service life.
Contact your dealer or Epson Support and tell them the maintenance request
code.
You cannot clear the maintenance request until the part is replaced. A service call
occurs if you continue to use the printer.
Call For Service
XXXX Error XXXX
Power off and then on. If this doesn’t work,
note the code and call for service.
A call for service occurs when:
❏ The power cable is not connected securely
❏ An error that cannot be cleared occurs
When a call for service has occurred, the printer automatically stops printing. Turn
off the printer, disconnect the power cable from the outlet and from the AC inlet
on the printer, and then reconnect. Turn on the printer again multiple times.
If the same call for service is displayed on the LCD panel, contact your dealer or
EpsonSupport for assistance. Tell them the call for service code is "XXXX".
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide
Problem Solver
181

Epson SC-T7200 Series Specifications

General

Memory	1 GB
Operating Systems	Windows, Mac OS
Technology	PrecisionCore TFP Print Head
Paper Sizes	A0, A1, A2, A3+, A3, A4
Media Types	Photo paper
Print Margin Roll	3 mm (top, left, right, bottom)
Interfaces	USB 2.0, Ethernet
Emulations	HP-GL/2
Ink Type	UltraChrome XD2 (Pigment)
Print Resolution	2, 880 x 1, 440 DPI