F
Move the printer.
c
Important:
Use the casters on the dedicated printer stand
only to move the printer indoors a short
distance over a level floor. They can not be
used for transport.
Notes on Transporting
Make the following preparations in advance before
transporting the printer.
❏ Turn off the printer and remove all cables.
❏ Remove any paper.
❏ Remove any optional components if they are
installed.
To remove the optional components, see the Setup
guide included with each of them, and then reverse
the attachment procedure.
c
Important:
When removing the MFP Scanner and stand, first
attach the metal fittings and scratch-prevention
sheet shown in the following illustration to the
stand. After attaching the metal fittings, remove the
MFP Scanner from the stand. If the order is
incorrect, the stand will be damaged.
Furthermore, repack it using the original box and
packing materials to protect it from shock and
vibration.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide
Appendix
208
To Next Page
Loading...
Need help?
General
