Item Description
Setting Name Enter a name of up to 22 characters for custom paper settings. Choose an
easy-to-remember name for quick selection.
Restore
Settings
Yes Restore the selected custom paper settings to
default values.
No
Print Paper List
Press the Z button to print a list of custom paper settings.
Roll Paper Remaining
On
*
Select whether to display/record (On) or not to
display/record (Off) the amount of remaining roll
paper. If On is selected, you will be prompted to
enter the length of the roll. The following options
can be made available by entering the length of
the loaded roll.
❏ Time until replacement
When the roll is removed, a barcode will
automatically be printed on the roll stating
the length remaining, the value selected for
the roll remaining alert, and the paper type.
The barcode is automatically read and
settings adjusted the next time the paper is
used, improving efficiency when multiple
rolls of paper are used.
❏ Printing Availability
The printer will estimate printing availability
based on the length of the roll.
Off
Remaining Alert
1 to 15 m (5
*
)
Displayed when On is selected for Roll Paper
Remaining.
Set within a range from 1 to 15 m to display a
warning when the amount of remaining roll paper
drops below that limit. You can set in 1 m
increments.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide
Using the Control Panel Menu
144
To Next Page
Loading...
Need help?
General
