Epson SC-T7200 Series - Page 70

B
Press the d/u buttons to highlight Stored Job
and press the Z button.
The print job tab info display area shows the
names of stored print jobs.
C
Press the d/u buttons to highlight the desired
job and press the Z button.
Information on the selected job will be displayed.
To exit without printing the job, press the W
button after viewing job data.
To print the job, proceed to Step 4.
D
Press the Z button.
You will be prompted to enter the number of
copies.
E
Press the d/u buttons to choose the number of
copies and press the Z button.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide
Saving to and Reprinting on the Optional Hard Disk Unit
70