D
Set Paper Size, Print Quality, and other
necessary settings, and then print.
If the printer predicts that the roll paper
remaining is shorter than the print length during
printing, it switches to the roll paper that is
longer than the print length automatically and
continues printing.
Making Settings for Mac OS X
A
Use the control panel of the printer to open the
Paper menu and set Roll Paper Remaining to
On, and then set the Roll Paper length loaded
into both Roll 1 and Roll 2.
When you set the roll paper, if roll paper length
has been set or a barcode with roll data is printed
on the current roll, proceed to Step 2.
U “Paper menu” on page 141
B
Using the control panel of the printer, confirm
Print Length is set in Setup menu > Printer
Setup > Roll Paper Setup > Roll Switch
Condition > Paper Length.
The default Paper Length setting is Print
Length. If the setting has not been changed, the
setting is Print Length.
U “Setup menu” on page 146
C
On the computer, open the Print screen, confirm
that Paper Size is Roll Paper, and then select
Printer Settings from the list.
D
Check that the Roll Switch is Auto.
If the setting is not Auto, click it and select
Auto.
E
Set Print Quality and other necessary settings,
and then print.
If the printer predicts that the roll paper
remaining is shorter than the print length during
printing, it switches to the roll paper that is
longer than the print length automatically and
continues printing.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide
More Ways to Print
95
To Next Page
Loading...
Need help?
General
