10.
Pull the cartridge lever down until it clicks into place.
e
Caution:
Check that there is no space between the carriage and
cartridge.
If
there is, repeat the
stepsfiom
step 7 on page Z-11.
11.
Press the
REPLACE INK
button to return the carriage to the
far right position. The printer then performs cleaning
procedures (it takes about
20
seconds). When the cleaning
is finished, the
PAUSE
light comes on.
12.
Press the
PAUSE
button to
turn
the
PAUSE
light off.
13.
Close the printer cover.
Setting Up Your Printer
1-13
To Next Page
Loading...
