Using Software Programs
To take full advantage of your printer’s features, find the
instructions for your software program or programs below.
After the instructions for specific programs is a section of
general information for other programs.
Microsoft@ Windows”
3.1
and all Windows Programs
If Windows is already installed on your system, follow the
steps below to choose the printer. Then your printer will work
correctly for all your Windows programs, such as Word for
Windows, Lotus@ l-2-3@ for Windows, and Core1 DRAW?
If Windows is not already installed on your system, run the
setup program as instructed by the Windows documentation,
and follow steps 4 through
10
below when you reach the
section for choosing a printer.
1.
In the window labeled
Main,
double click the
Control Panel
icon.
2.
Double click the
Printers
icon.
3.
Choose the
Add>
button on the right side of the screen.
4.
In the list of printers box, select Epson Stylus
300.
If Stylus
300
is not available, select Epson Stylus
800
or
Epson
AP-3250
ESC/P
2.
If these are also not available, select Epson
LQ-870.
5.
Choose the
Install
button. A dialog box may instruct you to
insert a diskette.
6.
If necessary, insert the diskette required.
7.
Choose the
Setup
button.
1-18
Setting Up Your Printer
To Next Page
Loading...
