If you want to use the printer’s internal fonts and the TrueType
fonts, contact Microsoft Windows Product Support.
WordPerfect
5.1
for MS-DOS*
If your current version of WordPerfect does not support the
Epson Stylus
300,
contact WordPerfect for details on obtaining
the correct driver.
Until your Stylus
300
driver arrives, you may want to install the
driver for one of the printers listed below:
Epson ActionPrinter 3250
Epson
LQ-870
Note:
If you
choose
the
LQ-870
printer
in WordPerfect, be sure
to
select
Sheet Feeder Bin 1
in
the
Printer Setup
screen.
If you have already installed WordPerfect for MS-DOS and you
want to add the WordPerfect Stylus
300
driver, follow the
instructions below:
1.
Select
File
and
Print
(or press Shift
F7).
2.
Type S (for
Select Printer).
3.
Type 2 (for
Additional Printers).
4.
Type 2 (for
Other Disk).
5.
Insert the diskette containing the Epson Stylus
300
driver.
6.
When
you
see
Directory for Printer files:
C:\WP51\,
type A:
or
B:,
depending on which drive you are using.
1-20
Setting Up Your Printer
To Next Page
