Epson Stylus 300 - Setting up Other Software Programs

Setting Up Other Software Programs
To take full advantage of your printer’s features, including
ESC/P
2, choose one of the ESC/P 2 printers on the list below.
If none of these is listed, contact your software manufacturer
for an update that includes one of these. Until you receive an
update, choose another printer as close to the top of the list as
possible.
Stylus 300
Stylus 800
ActionPrinter 3250
SQ-87011170
LQ-870/ 1170
LQ-570/ 1070
LQ- 100
1
E.SC/P 2
LQ-850+/ 1050+
SQ-85012550 LQ-550/ LQ-800/ LQ- 1500 10 1000 10
LQ-500
LQ-2550
-
-
ESC/P
If none of these printers is listed among your program’s
options, select the first one available from the following:
LQ,
EX,
FX, LX, RX, MX, Epson printer, Standard printer, and Draft
printer.
After you select the most appropriate printer as described
above, you may want to create and print a sample file with the
fonts and formats that you use most often. Printing the sample
file shows you how the printer works with your application
program.
If the printing results are not what you expect, see
“Troubleshooting” in Chapter 3 or consult your computer or
software manual.
1-22
Setting Up Your Printer