Epson Stylus 300 - Microsoft Word for MS-DOS; Lotus L-2-3 Version 3.X for MS-DOS; Using Fonts

7. Select Stylus 300 from the list of Epson printers on the
diskette and press
Enter. WordPerfect responds by
showing ‘the driver filename at the bottom of the screen.
8. Press Enter. The program copies the file into the WordPerfect
directory.
You can access the printer’s internal scalable fonts by selecting
Font and Base Font (or pressing CTRL F8 and then pressing 4).
WordPerfect displays a list of all the Stylus 300 fonts, including
the scalable fonts.
Microsoft Word for MS-DOS
Contact Microsoft’s Word for MS-DOS Product Support to get
the latest drivers.
Lotus l-2-3 Version 3.X for MS-DOS
To obtain the latest printer driver files for Lotus l-2-3 for
MS-DOS, contact Lotus technical support.
Using Fonts
There are two sources for the fonts you use in your documents:
internal and downloaded. In addition to the internal fonts built
into your printer, many programs can send their own fonts to
the printer in the same way they send your documents. For
instance, Lotus l-2-3 creates and sends the fonts that it uses to
print spreadsheets.
Whether you use internal fonts or fonts downloaded from
software, you will most likely need to select your fonts through
your software.
Setting Up Your Printer
1-21