2.
Insert a single sheet of paper into the slot until it
meets
resistance, aligning the right edge of the paper with the
arrow mark on the printer. The printer automatically loads
the sheet.
No tc:
[fthe
slwt
dots not load
straight, press the
LOAD/EJECT
buttot?
to
eject it.
Tim
try loading it
aCgain.
3.
Now give your print command. When the printer receives the
data, it begins printing.
When the printer finishes printing, it ejects the sheet
automatically. If the sheet does not come all the way out,
press the
LOAD/EJECT
button.
4.
You can print as many sheets as you like from the manual
slot. When you want to switch to the paper feeder, press the
LOAD/EJECT
button without inserting a sheet into the
manual slot. The printer then loads a sheet of paper from
the paper feeder.
Using Other Printer Functions
2-3
To Next Page
Loading...
