7.
Close the printer cover.
8.
Insert an envelope into the manual feed slot with the wide
end at the top entering the printer first and the printable
side face-up until it meets resistance. The printer loads the
envelope to the print position automatically.
9.
Now give your print command. The printer ejects the
envelope automatically when it is finished printing.
Note:
0
Make sure
yoz4r
application program keeps the printing entirely
within the printable area of the envelope. For a description of the
printable area, see the Appendix.
Ll
Use envelopes only under normal temperature and humidity
conditions.
LI
If the ink is not dryingfast enough, try removing envelopes one
at a time as theyfinish printing.
Using Other Printer Functions
2-5
To Next Page
Loading...
