Epson Stylus 300 - Page 52

3. Press the FONT button until the FONT lights indicate the
language of your choice; then press the ALT button to make
your selection.
Language
FONT light
English
a 0
French
a
ij
German
0
0
Italian
0
0
Spanish
0
ij
On 0 Off 0 Flashing 6
After you press the ALT button, the printer prints the current
default settings and the next instruction in the language
you selected. Wait until printing is finished; then go to the
next step.
4. To move to the feature you want to change, press the ALT
button until the DATA and PAPER OUT lights indicate the
appropriate selection.
Default-setting menu
DATA light
PAPER OUT light
Character table
l
0
Auto print direction
0
ij
Network interface mode
0
0
Mixed text/graphics mode
0
0
Auto line feed
0
ij
Loading position
ij
a
On 0 Off 0 Flashing 6
For example, if you want to change the loading position setting,
press the
ALT button until the DATA light flashes and the
PAPER OUT light is off.
If you are changing the character-table setting, skip to
“Changing the character-table setting” below.
Using Other Printer Functions
2-15