EPSON Stylus C67/C68/D68 Revision A
PRODUCT DESCRIPTION Paper 16
1.4 Paper
1.4.1 Paper Support
Cut sheets
Envelopes
Note *: Borderless printing is not supported for envelops.
Note *1: There is flap in the long side part, and it is fold down.
Loading paper under the oblong condition is done.
The flap side is moved to 80-digit side.
*2: Only for Stylus C67/D68.
Table 1-8. Cut sheets
Paper
size
Dimensions
Thickness
(mm)
Weight
(g/m
2
)
Quality
Paper Support
Width
(mm)
Length
(mm)
Stylus
C68
Stylus
D68
Stylus
C67
Legal
215.9
(8.5”)
355.6
(14”)
0.08-0.11 64-90
common
paper
recycled
paper
OK OK OK
Letter
215.9
(8.5”)
279.4
(11”)
OK OK OK
A4 210 297 OK OK OK
B5 182 257 NG OK OK
A5 148 210 NG OK OK
Half
Letter
139.7
(5.5")
215.9
(8.5")
OK NG NG
A6 105 148 OK OK OK
User
defined
50.8-329
127-
1117.6
OK OK OK
C A U T I O N
It is necessary that there is no winkle, nap, tear, fold and so on
in the form.
The curve of form must be five mm or below.
Table 1-9. Envelopes
*
Paper type
Dimensions (mm)
Weight Quality
Width Length
#10
*1
104.8 241.3
75-90g/m
2
bond paper
PPC paper
air mail
DL
*1
110 220
C6
*1
114 162
C A U T I O N
Use paper under normal conditions.
• Temperature 15 to 25°C (59 to 77°F)
• Humidity 40 to 60% RH
It is necessary that there is no winkle, nap, tear, fold and so on
in the form.
The curve and swell of the form must be three mm or below.
Don't use the adhesive envelope.
Don't use sleeve insert envelope and cellophane window
envelope.
As for double-flap envelope, if the envelope is damaged or bent
during printing, load the envelope with its flap facing in the
opposite direction. (Feeding direction should be changed as well
from the printer driver.)
If the printed images are skewed or misaligned from the proper
position, fold four sides of the envelope tightly.
If multi-feed occurs, press the [Paper] switch to feed the
envelope before starting printing again.
To Next Page
Loading...
