Epson Stylus C67 - Replacement Part-Based Adjustment Priorities

EPSON Stylus C67/C68/D68 Revision A
ADJUSTMENT Adjustment Items and Overview 80
5.1.3 Replacement Part-Based Adjustment Priorities
The following table indicates the adjustment items and priorities on a replacement part basis.
Performance Priority 1 2 3 4 5 6 7 8 9 10 11 12
EEPROM
data copy
Market
setting
USB ID
input
Waste ink
pad counter
Ink
charge
Head ID
input
Top margin
adjustment
First dot
adjustment
Head
angular
adjustment
Bi-D
adjustment
PF
adjustment
Offset input for
CR motor
calorific
limitation
ASF unit removal
--- --- --- --- --- --- applicable applicable
--- --- applicable ---
ASF unit replacement --- --- --- --- --- --- applicable
applicable --- --- applicable ---
CR motor removal --- --- --- --- --- --- --- applicable applicable applicable --- ---
CR motor replacement --- --- --- --- --- --- --- applicable applicable applicable --- applicable
Paper guide upper removal --- --- --- --- --- --- applicable --- --- --- applicable ---
Paper guide upper replacement --- --- --- --- --- --- applicable --- --- --- applicable ---
Frame front (only) removal --- --- ---
---
--- --- --- applicable applicable applicable --- ---
Frame front (only) replacement --- --- --- --- --- --- --- applicable applicable applicable --- ---
I/C holder removal --- --- --- --- --- --- applicable applicable applicable applicable applicable ---
I/C holder replacement --- --- --- --- --- --- applicable applicable applicable applicable applicable ---
Print Head assy. removal --- --- --- --- --- --- applicable applicable applicable applicable applicable ---
Print Head assy. replacement --- --- --- --- applicable applicable applicable applicable applicable applicable applicable applicable
Main board removal --- --- --- --- --- --- --- --- --- --- --- ---
--- --- --- --- ---
Main board replacement (Read OK) applicable --- --- --- --- --- ---
Main board replacement (Read NG) --- applicable applicable
--- (Pad
replacement)
--- applicable applicable applicable applicable applicable applicable applicable
Holder shaft unit removal --- --- --- --- --- --- applicable --- --- --- --- ---
Holder shaft unit replacement
--- --- --- --- --- --- applicable ---
--- --- --- ---
Note: “applicable” in this table indicates the adjustment
items required after removing/replacing the parts.
Adjustment item
Replaced part
Removal/Replacement