Epson Stylus C67 - Environmental Condition; Reliability; Safety Approvals

EPSON Stylus C67/C68/D68 Revision A
PRODUCT DESCRIPTION Specifications 12
1.2.6 Environmental Condition
Note *1: One month at 40°C and 120 hours at 60°C
*2: Under the following conditions
Figure 1-2. Temperature/Humidity Range
1.2.7 Reliability
 Total print volume: 20,000 pages (A4, Letter) or five years,
whichever comes first.
 Print Head Life: Eight billion shots (per nozzle) or five years,
whichever comes first.
1.2.8 Safety Approvals
 100-120 V version
 Safety standards: UL60950
CSA C22.2 No.60950
 EMI: FCC part15 subpart B class B
CSA C108.8 class B
 220-240V version
 Safety standards: EN 60950
 EMI: EN 55022(CISPR Pub.22) class B
AS/NZS CISPR 22 class B
Table 1-3. Environmental Condition
Operating Non-operating
Temperature
*1
10~35 °C
*2
-20~40 °C
Humidity 20~80 % 5~85 %
Resistance to shock 1 G, within 1 ms 2 G, within 2 ms
Resistance to vibration 0.15 G 0.50 G
C A U T I O N
 Printhead must be capped during storage.
 When transporting the printer, make sure that the printhead is
capped and the ink cartridges are installed in the printer.
 If the printhead is not capped when the printer is turned off,
turn the printer on with the ink cartridges installed, cap the
printhead, and turn the power off.
 Ink inside the ink cartridges freezes if it is left to stand at
temperature of -4°C or less. If this is the case, allow the ink to
stand for about three hours at 25°C temperature.
10
27
30
35
40
20
Temperature(°C)
20
30
40
50
90
80
70
60
Humidity(%)