Maintaining Your Printer
31
5. Pinch the front and back tabs of the
empty cartridge as you lift it out of
the printer. Don’t take the used
cartridge apart or try to refill it.
Warning: If ink gets on your hands,
wash them thoroughly with soap and
water. If ink gets into your eyes, flush
them immediately with water.
6. Before you remove the new
cartridge from its package, shake it four
or five times.
7. Remove the cartridge from its
package and lower it into the
cartridge holder. Push down gently
until the cartridge is firmly seated.
8. Repeat steps 5 through 7 for each
cartridge that you need to replace.
9. Close the printer cover and press the H ink button for one second. The printer
moves the print head and begins charging the ink delivery system.
The P power light flashes and the printer makes noise. Charging takes about one
minute. When it’s finished, the P power light stops flashing and stays on.
Caution: Never turn off the printer while the Ppower light is flashing, unless the
printer hasn’t moved or made noise for more than 5 minutes.
To Next Page
Loading...
Need help?
General