Epson Stylus CX4905 User Manual

EPSON Stylus CX4900/CX4905/CX5000/DX5000/DX5050/CX5900/CX6000/DX6000/DX6050 Revision A
DISASSEMBLY/ASSEMBLY Printer Section 144
 External view (2)
Figure 4-24. Removing Main Board Unit (2)
 Card Slot Unit Removal
1. Remove the screws (x2, ) that secure the Card Slot Unit, and remove the
Card Slot Unit from the Main Board Unit.
2. Release the tip of the Card Slot Spring from the tab (x1, ) of the Card Slot
Housing, and remove the Card Slot Spring.
3. Release the guide pin (x1, ) of the Card Slot Cover from the Card Slot
Housing, and remove the Card Slot Cover.
C.B.S. 3x6 F/Zn (7±1kgfcm)
1
2
Card Slot Unit
Tab
Card Slot Cover
Spring
Tip
Card Slot Cover
Guide Pin
Shaft
Guide Pins
Positioning Holes
Card Slot
Housing
 Set the shaft of Card Slot Cover into the Card Slot Housing and
align the guide pin.
 Install the Card Slot Spring as shown below.
Figure 4-25. Installing Card Slot Spring
 Tighten the scre
ws in the order as shown in the figure below.
 Match the
guide pins (x2, ) of the Card Slot Housing with the
positioning holes (x2,
) of the Main Board Unit.

Epson Stylus CX4905 Specifications

General

Brand	Epson
Model	Stylus CX4905
Category	Printer
Language	English