Epson Stylus Photo R3000 Service Manual

Epson Stylus Photo R3000 Revision A
Disassembly/Reassembly Detailed Disassembly/Reassembly Procedure for each Part/Unit 20
Confidential
Panel Board
Before disconnecting the LCD FPC, unlock the connector lock that
secures the LCD FPC. When connecting the LCD FPC, make sure
to insert the LCD FPC into the connector to the full and secure it
with the connector lock.
Locked
LCD FPC
Connector Lock
Unlocked
LCD FPC
Connector Lock
LCD Mounting Plate
When installing the LCD Mounting Plate, make sure the LCD is
located inside the protrusions (x3) of the LCD Mounting Plate, and
then secure the plate with the screws.
Protrusion
LCD Mounting Plate
LCD
C.B.P-TITE SCREW,2X6,F/ZN-3C (3 ± 1 kgf·cm)
Panel Shield Plate
 Install the Panel Shield Plate under the protrusion of the Panel
Buttons as shown above. Make sure that the plate contacts the
Housing Support reinforcing plate, and secure it with the screw.
 Tighten the screws in the order indicated in the figure above.
1
2
3
4
5
6
7
8
9
Panel Shield Plate
C.B.P-TITE SCREW,3X8,F/ZN-3C (6 ± 1 kgf·cm)
Grounding Plate
Protrusion of Panel Buttons
Housing Support
reinforcing plate
CR Scale
 Attach the CR Scale to the spring leg with the black triangle
mark upward on the left side of the printer.
 Attach the Torsion Spring, 0.39 as shown above.
CR Scale
Torsion Spring, 0.39
CR Scale
Black triangle mark
Longer spring leg
Waste Ink Tube / Waste Ink Pad
 When installing the Waste Ink Tube/Waste Ink Pads (x10),
confirm the shapes of them and install them in the order shown
above.
 When installing the Waste Ink Tube, route it through the
groove of the Waste Ink Pads, and insert the end of the shorter
tube to the section A and longer one to the section B.
Section B
Section A
Waste Ink Tube
/ Tube Holder
Waste Ink Pads
C.B.P-TITE SCREW,3X8,F/ZN-3C (6 ± 1 kgf·cm)
Waste Ink Tube
Installation
order
Decomp Pump Assy
 When connecting the Decomp Tube to the joint of the I/C
Holder Unit, make sure the gap between the end of the Decomp
Tube to the base of the joint is 1 mm or less, and then secure
the tube with the hooks (x2).
 Route the Decomp Tube through the groove of the Lower
Housing and secure the tube with the hook.
1 mm or less
Joint for Decomp Tube
Decomp Tube
Hook
Left inside of Lower Housing
Decomp Tube
I/C Holder Unit
Lower Housing
Decomp Tube
Groove
Left side
APG Assy
 When installing the APG Assy, align the marks on the Spur
Gear,14.4 and PG Cam Left to match their phases as shown
above.
 Tighten the screws in the order indicated in the figure above.
PG Cam LeftSpur Gear,14.4
Align triangle marks.
3
C.B.S-TITE SCREW,3X6,F/ZN-3C(8 1kgf·cm)
1
2
Ink Tube Holder
When installing the Ink Tube Holders (x2), install them on the
locations where the acetate tape (x2) is attached on the Ink Tube.
Ink Tube Holders
Ink Tube
Acetate Tape

Epson Stylus Photo R3000 Specifications

General

Color	Yes
Maximum resolution	5760 x 1440 DPI
Print speed (black, normal quality, A4/US Letter)	- ppm
Interface	USB 2.0
Print technology	Inkjet
Dimensions (WxDxH)	614.7 x 368.3 x 228.6 mm
Networking features	100Base-TX Ethernet
Paper tray media types	Photo paper, Plain paper
Non-ISO print media sizes	Letter
ISO A-series sizes (A0...A9)	A3
Compatible operating systems	Windows 7 (32-bit, 64-bit), Windows Vista (32-bit, 64-bit), Windows XP, Windows XP Professional x64 Mac OS X 10.5.x – 10.6.x
Optional connectivity	Ethernet, Wireless LAN
USB 2.0 ports quantity	1
Sustainability certificates	ENERGY STAR
Power consumption (standby)	3.5 W
Power consumption (printing)	21 W
Storage temperature (T-T)	-20 - 40 °C
Operating temperature (T-T)	10 - 35 °C
Storage relative humidity (H-H)	5 - 85 %
Operating relative humidity (H-H)	20 - 80 %
Sound power level (printing)	38 dB
Country of origin	China
Market positioning	Home & office
Pallet width	800 mm
Pallet height	2150 mm
Pallet length	1200 mm
Pallet width (UK)	1000 mm
Quantity per pallet	10 pc(s)
Quantity per pallet layer	2 pc(s)
Package depth	750 mm
Package width	490 mm
Package height	400 mm
Package weight	19420 g
Quantity per pack	1 pc(s)

Weight and Dimensions

Depth	368.3 mm
Width	614.7 mm
Height	228.6 mm