Epson Stylus Photo R3000 Service Manual

Epson Stylus Photo R3000 Revision A
Disassembly/Reassembly Routing FFCs/cables 29
Confidential
1.4 Routing FFCs/cables
Upper Housing Support Assy
Route the Panel FFCs though the hole of the Upper Housing, and connect it to
the connector on the Panel Board.
Panel Board
Panel FFCs
Upper Housing
Hole
Cover Open Sensor
When routing the Cover Open Sensor Cable, follow the procedure below.
1. Make one turn around the hook of the Upper Housing Support Assy
without slack between the Cover Open Sensor and the hook.
2. Connect the cable to the connector on the Panel Board.
3. Roll up the slack cables between the connector on the Panel Board and the
hook as shown above.
Cover Open Sensor Cable
Upper Housing Support Assy
Hook
Head FFC
 Route the Head FFC through the I/C Holder Unit and Cable Holder Front as shown above.
 When routing the I/C Holder Unit Cover Open Sensor Cable, make one turn around the hook of the I/C Holder Unit and route through the ribs (x4) of the
Cable Holder Front, and then make one turn around the hook of the Cable Holder Front.
I/C Holder Unit Cover Open Sensor Cable:
make one turn around hook.
I/C Holder
Unit
Front
Cable Holder
Front
Rib
Hook
Head FFC
Upper
Cable Holder Front
I/C Holder Unit Head FFC
Rib
Cable Holder Front
I/C Holder Unit Cover
Open Sensor Cable
PictBridge Holder Assy / Decomp Pump Assy
 When routing the Decomp Pump Motor Cable through the Decomp Pump
Assy, route the cable through the following ribs and hooks.
• Ribs (x3) and hook on the upper side of the Decomp Pump Assy
• Hooks (x4) and ribs (x2) on the side of the Decomp Pump Assy

Route the following cables through the ribs and grooves of the Lower Housing.
• Decomp Pump Motor Cable
• PictBridge Holder Assy Cable
• Stopper Tray Sensor Relay Cable
Decomp Pump Assy
Rib
Hook
Decomp Pump Motor Cable
Stopper Tray
Sensor Relay Cable
PictBridge Holder Assy CableDecomp Pump Motor Cable
Make two turns
around hook.
Groove
Rib
CR Support Plate / Ink Selector
Route the following cables/FFCs as shown above and connect them to the
connectors on the CR Relay Board.
 Ink Selector Motor Cable (CN2)
 Ink Selector Sensor Cable (CN5)
 Head FFC (CN1)
 CR Encoder / PW Sensor FFC (CN6)
CR Encoder / PW Sensor FFC
Head FFC
Route Ink Selector Motor Cable
and Ink Selector Sensor Cable
through cutout of Ink Selector.
CR Relay Board
Ink Selector
CR Support Plate
Upper side of the Board Assy
 Route the Panel FFC through the ribs (x2) along with the reference line as shown above, and secure it with double-sided tape and two pieces of acetate tape A.
 Route the PE Sensor Cable through the ribs (x6) of the Release Holder Assy, and secure it with the clamp.
 Attach acetate tape B (18 x 30 mm) on the position shown above.
 Route the cables through the groove on the Shield Plate Assy Upper Main Board arranging them in the order shown in “cross-section” above, and secure
them with the Cable Holders (x2).
Cable Holder
Acetate Tape B: 18 x 30 mm
Right
Rib
Acetate Tape A
Double-sided tape Reference line
PE Detector
Assy
PE Sensor Cable
Clamp
Release Holder AssyPanel FFC
Cross-section
2
1
3
4
Pump Motor Cable
Roll Paper Guide
Open Sensor Cable
ASF Motor Relay Cable
CR Motor Cable1
2
3
4
5
Cable Holder5
6
6
Shield Plate Assy Upper
Main Board
Cable Holder
Groove of Shield Plate
Assy Upper Main Board

Epson Stylus Photo R3000 Specifications

General

Color	Yes
Maximum resolution	5760 x 1440 DPI
Print speed (black, normal quality, A4/US Letter)	- ppm
Interface	USB 2.0
Print technology	Inkjet
Dimensions (WxDxH)	614.7 x 368.3 x 228.6 mm
Networking features	100Base-TX Ethernet
Paper tray media types	Photo paper, Plain paper
Non-ISO print media sizes	Letter
ISO A-series sizes (A0...A9)	A3
Compatible operating systems	Windows 7 (32-bit, 64-bit), Windows Vista (32-bit, 64-bit), Windows XP, Windows XP Professional x64 Mac OS X 10.5.x – 10.6.x
Optional connectivity	Ethernet, Wireless LAN
USB 2.0 ports quantity	1
Sustainability certificates	ENERGY STAR
Power consumption (standby)	3.5 W
Power consumption (printing)	21 W
Storage temperature (T-T)	-20 - 40 °C
Operating temperature (T-T)	10 - 35 °C
Storage relative humidity (H-H)	5 - 85 %
Operating relative humidity (H-H)	20 - 80 %
Sound power level (printing)	38 dB
Country of origin	China
Market positioning	Home & office
Pallet width	800 mm
Pallet height	2150 mm
Pallet length	1200 mm
Pallet width (UK)	1000 mm
Quantity per pallet	10 pc(s)
Quantity per pallet layer	2 pc(s)
Package depth	750 mm
Package width	490 mm
Package height	400 mm
Package weight	19420 g
Quantity per pack	1 pc(s)

Weight and Dimensions

Depth	368.3 mm
Width	614.7 mm
Height	228.6 mm