Epson Stylus Pro 3800/3800C/3850/3880/3885/3890 Revision C
DISASSEMBLY & ASSEMBLY Disassembly/Assembly Procedure (Group 1) 110
4. Remove the OPTICAL TUBE, LED, LEFT/RIGHT and the BUTTON, PS from
the OPERATION PANEL. See Figure 4-23.
5. Remove the OPERATION BUTTON from the OPERATION PANEL. See Figure
4-23.
6. Remove the COVER, LCD secured to the OPERATION PANEL with the two-
sided tape. See Figure 4-24.
Figure 4-23. Disassembling the OPERATION, PANEL, ASSY.
Figure 4-24. Removing the COVER, LCD
When installing the BUTTON, PS, be sure to insert its positioning
hole over the guide pin on the OPERATION BUTTON.
BUTTON, PS
positioning point
OPERATION BUTTON
OPERATION PANEL
OPTICAL TUBE, LED,
LEFT
OPTICAL TUBE, LED,
RIGHT
BUTTON, PS
OPERATION PANEL
Two-sided Tape
COVER, LCD
To Next Page
Loading...
