Epson Stylus Pro 3800 - Operation Panel; Buttons and Functions; Buttons; Led

Epson Stylus Pro 3800/3800C/3850/3880/3885/3890 Revision C
PRODUCT DESCRIPTION Operation Panel 20
1.6 Operation Panel
1.6.1 Buttons and Functions
Figure 1-7. Operation Panel
1.6.2 Buttons
Note "*1": The printer is always turned OFF regardless of operation status.
"*2": When turning the power ON while holding down the Cancel button, the maintenance mode
becomes activated. (Refer to
"1.6.7 Maintenance Mode" (p28) for details.)
"*3": Deactivated during printing.
1.6.3 LED
Button
Functions
Normal One Press
Hold Down for
3 Seconds
Function at the
Panel Setting
1 Back/Left -- --
Moves to the previous
menu item (Ascent)
2
Ink Cover Open/
Up
--
Unlocks the Ink
Cover
Set Value +
3 Power Turns the power ON or OFF
*1
-- Power OFF
4 Cancel/Reset
*2
• Clears error
• Opens I/H Cover
(When the printer runs out of ink)
Cancels the job Interrupts panel setting
5 Enter -- --
• Accepts the change
of setting
• Executes the
selected operation
• Saves the setting
3
4 6
7
B
A
1
2
5
Back/Left
Ink Cover Open/Up
Power
Cancel/Reset
Enter
Paper Feed/Down
Menu/Right
Power LED
Paper status LED
Ink status LED
C
6
Paper Feed/
Down
• When paper is set
ASF: Ejects the paper
Manual-Rear: Backfeeds the paper
Manual-Front: Ejects the paper
• When paper is not set
ASF starts paper feeding
• When Manual-Front Tray Cover is
opened.
Manual-Front starts paper feeding
-- Set Value -
6Menu/Right
• During printing
Changes the panel display to the
Printer Status Menu
• When not printing
Shifts the printer into the Panel
Setting Mode
Runs a head
cleaning
*3
Moves to the next
menu item (Descent)
LED Color Displays Status
Power Green
ON The power is ON.
Flashing
*
Receiving data, during printing, or executing power off
sequence.
OFF The power is OFF.
Paper status Red
ON Impossible to make a print due to the paper status.
Flashing
*
• A paper feeding or ejecting error is occurring.
• A maintenance call error is occurring.
OFF
The papers are in normal condition without an error or
warning.
Ink status Red
ON An ink-related error is occurring.
Flashing
*
An ink-related warning is occurring.
OFF
The inks are in normal condition without an error or
warning.
Button
Functions
Normal One Press
Hold Down for
3 Seconds
Function at the
Panel Setting
A
B
C