Epson Stylus Pro 3800 - Orientation Definition; Tools

Epson Stylus Pro 3800/3800C/3850/3880/3885/3890 Revision C
DISASSEMBLY & ASSEMBLY Overview 88
4.1.2 Orientation Definition
The following figure defines the orientation of the printer, which is applicable to
chapter 4.
Figure 4-1. Orientation Definition1
4.1.3 Tools
To protect the printer from damage, use the tools indicated in the following table.
Left
Right
Rear
Up
Down
Front
Table 4-1. Tools
Name
Epson Part
Number
Note
Precision screwdriver, No. 2 Commercially
available
---
Phillips screwdriver, No. 0 Commercially
available
---
Phillips screwdriver, No. 1 Commercially
available
---
Phillips screwdriver, No. 2 Commercially
available
140 mm or longer shaft length is
recommended.
Flat-blade screwdriver Commercially
available
---
Long-nose pliers Commercially
available
---
Tweezers Commercially
available
---
Nipper Commercially
available
---